Product information, KOYO PLC's

Back

	Koyo series 05 Eight Inputs and six outputs • Two communication ports • 5Khz high-speed counter or interrupt input • 129 instructions for programming • 2K program memory • 4K data memory • Modbus RTU/Directnet communication • 4 PID LOOP • Removeable terminal block for your installation convenience
	Koyo series 06 Fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. 7.5 program memory • 7.3K data memory • Two communication ports including built-in RS232/RS422/RS485 port • 229 instructions, including eight PID loops and ASCII
	Koyo series 205 Up to 1280 I/O local • 8192 I/O total • Two communication ports • Over 30 types of I/O modules • Up to 170 instructions for programming • 7,5K program memory • 7K data memory • Modbus RTU / Directnet communication • 4 PID LOOP • Floating-point Math • Real time clock calender
	Koyo series 405 Up to 2048 I/O local • 8192 I/O total • Four communication ports • Over 40 types of I/O modules • Up to 170 instructions for programming • 15,5K program memory • 15K data memory • Modbus RTU / Directnet communication 16+96 PID LOOP • 100 Khz high speed counter • Floating-point Math • Real Time Clock Calendar
	Koyo Terminator I/O Terminator I/O is the flexible cost saving solution for a distributed I/O system, used for e.g. SoftPLC systems, I/O extension to your PLC system or simply as data collection points for an OPC server. You can distribute I/O nodes with Terminator I/O close to the field devices for faster and more efficient wiring and troubleshooting. A full range of network modules are supported, including Ethernet with Host IP and/or Modbus TCP protocol, DeviceNet, Modbus, Koyo remote I/O and Profibus (released autumn 2001).
	Koyo EBC Ethernet Base Controller for DL205/405 base, supports discrete and analog I/O. Supports 10 base-T connections to PC-based controllers, supporting IP/IPX protocol.
	Koyo ECOM Ethernet Communication module, master/slave on an Ethernet 10 baseT network at 10 Megabaud.
	Koyo PLC software Directsoft, 32-bit PC programming and documentation software, includes software on CD-ROM and user/quickstart manual. 32-bit application, requires Windows 95/98 or NT.
	Koyo PLC course book (only available in danish) PLC typer • Kommunikation • Software • Grundlæggende instruktioner • Opgaver • Videregående instruktioner • Analogbehandling • Appendiks.
	Support, Workshops & Support engineering Pro-face/Koyo/Idec kurser • Workshops • Tilmelding • support.
Copyright © 2006 BRODERSEN AUTOMATION A/S. All rights reserved Brodersen will accept no liability what so ever regarding any typographical, clerical or other error or omission on this site.