|
|
BC
Converters
With
Brodersen PX process relays, signals can be
converted from one standard to another and even an
analogue signal can be effectively fed into a
digital input. The PX relay is a high quality
product which has been designed and tested to the
latest requirements for EMC immunity/emission and
the low voltage directive (CE marked).
The PX relay also provides a galvanic isolation of
3.75kV. The PX relay is of a new design, supplied
in a standardised industrial housing, 22.5mm wide,
for mounting on 35mm symmetrical DIN-rail with
touch-proof, combi notch-screw terminals. A
snap-on cover on the front of the relay conceals
the adjustment/setting switches to achieve both a
clean profile and to discourage unwanted
attention. Front mounted LEDs clearly signal the
status of the relay.
|
|
|
BC
Control relays
A
wide range of commonly used standards of voltage,
current, temperature and process signals can be
monitored by the Brodersen relays.
The Brodersen Control and monitoring relays are
produced in two design categories; installation
and industrial design. The installation design is
based on DIN rail or 11 pole plug-in mounting and
are designed to fit into installation enclosures.
The industrial design is in 22,5mm housing with
the terminals placed to optimize installation time
in industrial applications.
|
