|
Back
|
|
|
|
|
Advantech ADAM-4000 I/O Modules Series
The ADAM-4000 series modules use the EIA RS-485
communication protocol, the industry's most widely
used bi-directional, balanced transmission line
standard. It lets the ADAM-4000 series modules
transmit and receive data at high rates over long
distances. The ADAM-4000 series offers two kind of
products: communication and I/O.
|
|
|
ADAM-4000 Communication & Controller Modules
The ADAM-4000 series communication modules provide
versatile interfaces including Ethernet, serial,
fiberoptics wireless, etc.
|
Type no. |
Description |
Datasheet |
|
ADAM-4500 |
PC-based
communication controller |
Click to see
datasheet |
|
Powerful
communication controller in a small package •
Built-in Boot ROM DOS to run PC programs •
Free ROM/RAM memory for user's applications •
2-wire, multi-drop RS-485 networking •
Communication speed up to 115.2 k baud rate |
|
Type no. |
Description |
Datasheet |
|
ADAM-4570 |
2-port Ethernet
to serial data gateway |
Click to see
datasheet |
|
RS-232:300 bps
to 115.2k bps • 2 serial ports: RS-485/422:300
bps to 921.6K bps • Universal type, free for
user-definition • 10/100 Base-T Ethernet port,
supports TCP/IP Protocol |
|
Type no. |
Description |
Datasheet |
|
ADAM-4571 |
1-port Ethernet
to serial data gateway |
Click to see
datasheet |
|
Automatic RS-485
data flow control Introduction • Standard
10/100BASE-T Ethernet Support • Surge
protection for RS-485 line and power supply •
Network broken handing • Supports high
transmission speeds up to 230 Kbps • Easy to
locate specific ADAM-4571 • 1 RS-232/485/422
port • Supports an advanced security mechanism
to avoid unauthorized access • Auto-detecting
Configuration Utility • Remote download
firmware: Easy to maintain • Easy managing
Port Mapping Utility |
|
Type no. |
Description |
Datasheet |
|
ADAM-4510/4510S |
RS-422/485
repeater |
Click to see
datasheet |
|
Automatic
internal RS-485 bus supervision • No external
flow control signals required for RS-485 •
3000 VDC isolation protection (ADAM-4510S) •
Transient suppression on RS-485 data lines •
Speed up to 115.2 kbps |
|
Type no. |
Description |
Datasheet |
|
ADAM-4520 |
Isolated RS-232
to RS-422/485 converter |
Click to see
datasheet |
|
Automatic
internal RS-485 bus supervision • No external
flow control signals required for RS-485 •
3000 VDC isolation protection (ADAM-4520) •
Transient suppression on RS-485 data lines •
Speed up to 115.2 kbps |
|
Type no. |
Description |
Datasheet |
|
ADAM-4521 |
Addressable
RS-422/485 to RS-232 converter |
Click to see
datasheet |
|
Built-in
microprocessor • Transmission speeds of up to
115.2 kbps • 1000 VDC isolation • Surge
protection on RS-485 line • RS-232 and RS-485
can be set to different baud rates |
|
Type no. |
Description |
Datasheet |
|
ADAM-4522 |
RS-232 to
RS-422/485 converter |
Click to see
datasheet |
|
Networking up to
4000 feet • 3000 V DC isolation protection •
Transmission speeds up to 115.2 Kbps • Power
requirement:+10 ~+30 VDC • Automatic RS-485
data flow control |
|
Type no. |
Description |
Datasheet |
|
ADAM-4541 |
Fiber optics to
RS232/422/485 converter |
Click to see
datasheet |
|
Compact size
economizes space • Direct plug-and-play •
Easily mounted on a DIN-rail, panel or
piggyback • Transmission speeds of up to 115.2
Kbps • Half/Full-duplex, bidirectional
transmission mode |
|
Type no. |
Description |
Datasheet |
|
ADAM-4542+ |
Fiber optics to
RS232/422/485 converter |
Click to see
datasheet |
|
Converts
single-mode fiber optic signals to
RS-232/422/485 serial signals • A newly
invented redundancy feature also promises
improved reliability • ADAM-4542+ improves
over its predecessor (ADAM-4542) by adding a
unique redundancy feature |
|
|
|
ADAM-4000 Analog I/O Modules
The ADAM-4000 series analog I/O modules offer
complete signal conditioning & communication
solutions between the host PC and analog field
signals.
|
Type no. |
Description |
Datasheet |
|
ADAM-4011/4011D |
Thermocouple
input module |
Click to see
datasheet |
|
Isolation
voltage: 3000 VDC • Input type: Thermocouple,
mV, V or mA • Watchdog Timer • LED indicator:
4-1/2 - digital readout (4011D) |
|
Type no. |
Description |
Datasheet |
|
ADAM-4013 |
RTD input module |
Click to see
datasheet |
|
Built-in
Watchdog Timer • Accuracy +/- 0.05% or better
• Isolation Voltage 3000 VDC • Sampling Rate
10 sample/sec |
|
Type no. |
Description |
Datasheet |
|
ADAM-4015 |
6-channel RTD
module with Modbus |
Click to see
datasheet |
|
6-channel 2 or 3
wires RTD Input • Accept Pt100/1000, Balco500,
Ni input signals • Channels configurable for
different types of input individually • Wiring
burned-out detectable function • 3000 VDC A/D
to logic isolation |
|
Type no. |
Description |
Datasheet |
|
ADAM-4016 |
Analog
input/output module |
Click to see
datasheet |
|
Input type: Pt
or Ni RTD • Strain Gauge Input • Watchdog
Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4017/4017+ |
8-channel analog
input module with Modbus |
Click to see
datasheet |
|
Channels: Six
differential, two single-ended • Input type:
mV, V, mA • Sampling rate: 10 samples/sec.
(total) |
|
Type no. |
Description |
Datasheet |
|
ADAM-4018/4018+ |
8-channel
thermocouple input module with Modbus |
Click to see
datasheet |
|
Channels: Six
differential, two single-ended • Input type:
Thermocouple, mV, V, mA • Fault and
overvoltage protection • Watchdog Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4018M |
8-channel analog
input data logger |
Click to see
datasheet |
|
Channels: Six
differential, two single-ended • Input type:
Thermocouple, mV, V, mA • Capacity (128 KB
Flash memory): 38,000 samples (total) •
Sampling interval: 2 secs. ~ 18 hours •
Watchdog Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4019 |
8-channel
universal analog input module |
Click to see
datasheet |
|
Input Type: V,
mV, mA, T/C • Isolation Voltage 3000 VDC •
Sampling Rate 6 sample/sec (total) • Accuracy
+/- 0.1% or better • multi-ch/multi-range
mechanism • 8 differential analog input |
|
Type no. |
Description |
Datasheet |
|
ADAM-4021 |
Analog output
module |
Click to see
datasheet |
|
Output type: mA,
V • Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10
V • Isolation voltage: 3000 V DC |
|
Type no. |
Description |
Datasheet |
|
ADAM-4022T |
Serial based
dual loop PID controller |
Click to see
datasheet |
|
Channels: 4 •
Input Type: mA, V, Thermistor, RTD • Input
Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V •
Watchdog Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4024 |
4-channel analog
output module with Modbus |
Click to see
datasheet |
|
12-bit
resolution • Software configurable for mA or V
output in individual channels • 4 digital
inputs for latch output • 2500 VDC D/A to
Logic isolation • Programmable output slope:
0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec. |
|
|
|
ADAM-4000 Digital I/O Modules
The ADAM-4000 series I/O modules offer complete
signal conditioning & communication solutions
between the host PC and digital I/O field signals.
|
Type no. |
Description |
Datasheet |
|
ADAM-4050 |
Digital I/O
module |
Click to see
datasheet |
|
7 input
channels, 8 output channels • Watchdog Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4051 |
16-channel
isolated digital input module with LED &
Modbus |
Click to see
datasheet |
|
16 digital input
channels • Digital input for dry contact or
wet contact • Input Voltage level: 10~15 Vdc •
Over voltage protection: 70 Vdc • 2,500 Vdc
optical isolation |
|
Type no. |
Description |
Datasheet |
|
ADAM-4052 |
Isolated digital
input module |
Click to see
datasheet |
|
Six fully
independent isolated channels • Two isolated
channels with common ground • Isolation
voltage: 5000 V RMS |
|
Type no. |
Description |
Datasheet |
|
ADAM-4053 |
16-channel
digital input module |
Click to see
datasheet |
|
16 input
channels • Watchdog Timer |
|
Type no. |
Description |
Datasheet |
|
ADAM-4055 |
16-channel
digital I/O module with LED & Modbus |
Click to see
datasheet |
|
I/O type: 8
DO/DI • Input Voltage level: 10~50 VDC • Open
Collector to 40 VDC • Over voltage protection:
70 VDC • 2,500 VDC optical isolation |
|
Type no. |
Description |
Datasheet |
|
ADAM-4060 |
4-channel relay
output module |
Click to see
datasheet |
|
4-channels
relay, two Form A and two Form C • Breakdown
voltage: 500VAC (50/60 Hz) • Insulation
resistance: 1000Mohms minimum at 500V DC |
|
Type no. |
Description |
Datasheet |
|
ADAM-4068 |
8-channel relay
output w/LED module with Modbus |
Click to see
datasheet |
|
I/O type: 8
channels from C (NO/NC selectable) • Contact
rating: AC: 125 V/0.6 A; 250 V/0.3 A, DC: 30
V/2 A; 110 V/0.6 A • Switch Time: Relay on
time (typical): 3 msec, relay off time
(typical): 1 msec. • LED Indicators • Supports
Modbus/RTU protocol |
|
Type no. |
Description |
Datasheet |
|
ADAM-4080/4080D |
Counter/frequency module |
Click to see
datasheet |
|
Programmable
digital filter • Counter preset selection •
Programmable threshold for non-isolated input
• 2 digital outputs or high/low alarms • 2500
VRMS isolation • 2 independent 32-bit counters |
|
Type no. |
Description |
Datasheet |
|
ADAM-4531 |
Modbus to BACNET
converter |
Not available |
|
- |
|
Type no. |
Description |
Datasheet |
|
ADAM-4914V |
4-channel
voltage input surge protection module |
Click to see
datasheet |
|
Channels: 4
differential voltage input and thermocouple •
Discharge Voltage: Between lines- 18 V
minimum, Line to GND- 350 V maximum •
Discharge current: 5,000 A (8/20 Usec.) |
|
|
|
ADAM-4000 Catalog
Catalog with
ADAM-4000 I/O modules highlights.
Click to
download catalog
|
|
Copyright © 2006 BRODERSEN AUTOMATION A/S. All rights reserved
Brodersen will accept no liability what so ever regarding any typographical,
clerical or other
error or omission on this site. |